Why Your Furnace is Not Performing the Way it Should

In 2019, the average temperature in North Dakota was 27.7 degrees, making it the coldest state in the US.

However, you don’t have to live in the coldest place in the contiguous United States to appreciate home heating. In the winter months, heating is what makes our homes livable, and our furnace is at the center of that heating system.

If your furnace is not working, you need to fix it before the cold of winter sets in. The good news is, there are some furnace issues that you can diagnose and fix on your own. Let’s learn what they are and get your Valparaiso furnace back online ASAP.

Reasons Your Valparaiso Furnace is Not Working

If your furnace is not working, or not working as it should, then don’t ignore the problem. Ignoring necessary Valparaiso, FL  furnace maintenance can lead to further damage and more expensive fixes.

While most problems with a furnace require the help of a professional, there are some fixes you can do on your own. These are the most basic reasons a heating system might not be heating your home as it should.

  1. Thermostat

Your thermostat is what tells your furnace to turn on and what temperature to heat the home to. If there’s something wrong with the thermostat, it’s going to affect your home heating system.

First, check to make sure that the temperature gauge is set to heat and not cool. Then, check the batteries, any wiring, and the program settings as laid out in the instruction manual.

  1. Circuits and Fuses

If the circuit breaker is off or a fuse has blown, your furnace can’t turn on. You can reset the circuit breaker by flipping it off and then on again. If a fuse has blown, it will need replacement.

Be sure to check the main electrical panel as well as any secondary subpanels.

  1. Air Filters

The air filter is intended to prevent airborne particulates from circulating throughout your home. Dust, pollen, and other debris get trapped in these filters within your vents.

When air filters aren’t changed regularly, dirt and debris build-up. This causes blockages in the airflow and, in turn, causes your furnace to work harder than it should.

Check that your air filters are clean and in good condition if you’re noticing that your furnace is not working. Furnace filters should be changed once every few months.

  1. Burner Flames

Your burners must be clean in order to function properly. To inspect the burners, you can have a look at the burner flame.

If the flame is blue and even, then your burners are clean. However, if the flame is yellow, then the cause is probably a dirty burner. Clean a dirty burner of air contaminants with your vacuum.

For Everything Else, Call a Valparaiso Professional Furnace Service

When your furnace is not working and winter is approaching, you need a solution and fast. The above items are easy enough to check on your own and even make the necessary repairs to get your heating system back up and running. For everything else, you’ll need the experience of a professional.

Find out more about our heating services here